Deluxe Winch Stand, option on LT -
Now standard on 20/22-13
Any Mid America trailers can accommodate triple tube pontoons.
Not everyone needs a Super Duty. (SD) If you’re buying a trailer just for storage Mid America standard frames are the best in the industry. But people who travel with heavy boats could benefit from an even stronger trailer.
The Super Duty Package
5”-1/4” steel frame
Full length frame stiffeners. In addition to Mid Americas already strong frame the SD package adds two full length pieces of 2” x 4” steel to further reinforce the frame. Big heavy pontoon boats twist and flex when traveling. A stronger, better braced frame helps prevent twisting and flexing.
Five leaf spring system in lieu of four. Five leaf springs have 3000 lb. capacity and give you a little smoother ride.
Tandem axle disc brakes with a tandem brake actuator.
14” radial tires in lieu of 13”. Our 13” D range radial tires carry 1610 lb. But 14” tires run even cooler and carry 1760 lb. The 14” tires only make the trailer sit 1” higher than 13”
Triple Pontoon Trailer Package
PT-22 may accommodate older pontoon boats with 24’ pontoon tubes and 20’ decks but is not recommended for the modern larger 24’ pontoons with 22’-24’ decks
Light duty single axle model trailers are built for 16’ to 18’ pontoon boats up to 1800 lbs. These trailers are built with 3×2 – 14 gauge steel tube frames and have up to 4, 3×2-14 gauge cross braces for extra stability and smooth towing. Powder coat black finish
Econo step with handrail & winch – folding tongue jack – high impact ABS fenders – adjustable carpeted bunks from 6’ to 8’ 6” wide – led lighting – protective steel tail light housings with tie down loop – 3500 lb axles – ez lube hubs – 4 leaf springs – 12” bias or 13” radial tires on steel painted wheels. Includes all required D.O.T. equipment; lighting, safety chains, etc. for the USA and Canada.
Triple Tube “Extended Frame” Option
Some triple tube pontoons (Bennington, Manitou, South Bay) have center tubes and engines that extend 2’ to 4’ beyond the back of the pontoons. When traveling, the longer center tube and engine should be supported. Additional framework attached to the back extends the frame to support the longer center pontoon. This is especially important on boats with larger engines that extend beyond the back of the boat. .
PT-24T/13 Tandem Axle Trailer for 22’-24’ pontoons
19’ bunks, 28 overall, 4” frame, 13” D range radial tires, Winch Stand with steps, handrail and LED Lighting
NA on 26T
PT-20/13 Single Axle Trailer for 18’-20’ pontoons
15’ bunks, 24’ overall length, 4” frame, 13” tires, Winch Stand with steps & handrail and LED Lighting
PT-22/13 Single Axle Trailer for 21'-23’ pontoons
17’ bunks, 26’ overall length, 4” frame, 13” tires, Winch Stand with steps & handrail and LED Lighting
Single axle model trailers are made for 16’ to 22’ pontoon boats up to 3220 lbs. These trailers are built with 4×2-11 gauge steel tube frames and 3×2-14 gauge steel tube cross braces for extra stability and smooth towing. powder coat black finish.
Deluxe step with handrail & winch – folding tongue jack –molded plastic fenders – adjustable carpeted bunks from 6’ to 8’ 6” wide – led lighting –custom self-grounding wire harness – protective steel tail light housings with tie down loop – 13” radial tires on steel painted wheels – 3500 lb axles – ez lube hubs – 4 leaf springs – Includes all required DOT equipment; lighting, safety chains, etc. for the USA and Canada.
Two-3500 lb. axle, 4” box steel frame with baked-on powder-cote finish, a 2” coupler, a 1500 lb. dual wheel swing away tongue jack, front loading winch stand with steps and a handrail, custom style steel fenders with steps, 13” D range radial tires, 5000 lb. carrying capacity, bunks adjust for pontoons 6’ to 8’ 6” wide, modern LED lighting with tail lights in protective cages, 24’ and 26’ models have “ultra” reinforced bow and stern with 5 cross members trying the side frames together, modern distinctive graphics, marine grade rubber backed carpeting over 2” x 4” wooden bunks), bunks are supported on the main frame cross members. Includes all required D.O.T. equipment; lighting, chains, etc. required for the USA and Canada.
Tandem Axle Super Duty Pontoon Trailers
PT-26T/13 Tandem Axle Trailer for 25’-27’ pontoons
20’ bunks, 30’ overall, 4” frame, 13” D range radial tires, Winch Stand with steps, handrail and LED Lighting
Stops 3500 lbs.
Chrome diamond plate on the winch stand, steps, tail lights, and fenders. 12” pieces on the front frame and small pieces on the tail light bracket. Diamond plate really stands out on the black trailer.
Front Storage Box
Your tow vehicle stops the load
Front Loading Winch
Super Duty Packages for 24 & 26 Pontoon Trailers
Aluminum Rim Wheel Exchange
Reinforced frame on 22' and larger trailers. Not available (or needed) on most 20' trailers.
• Strap retracts for easy storage and no tangling
• Easy bolt on function (Hardware included)
• Vinyl coated J-hooks protect boats finish
• Provides super strong holding power
• 2" x 43" Transom Retractable Ratchet Tie Down Straps
Galvanized Rim Wheel Exchange
Plastic Bunk Wrap
Specify if you need the Deep Stand.
Spare 13" Tire w/mount
PT-20T/13 Tandem Axle Trailer for 18’-21’ pontoons
15’ bunks, 24’ overall, 4” frame, 13” D range radial tires, Winch Stand with steps, handrail and LED Lighting
Single Axle Pontoon Trailers
PT-22T/13 Tandem Axle Trailers for 20’-22’ pontoons
17’ bunks, 26 overall, 4” frame, 13” D range radial tires, Winch Stand with steps, handrail and LED Lighting
Single Axle Light Duty Pontoon Trailers
PT-16 LT Single Axle Trailer for 14’-16’ pontoons
12’ 4" bunks, 20’ overall, 3” frame, 12” E range tires, Winch Stand with steps, handrail and LED Lighting. 1800lb Carrying Capacity.
PT-18 LT Single Axle Trailer for 18’-20’ pontoons
16’ 3" bunks 23’ overall, 3" frame, 12” E range tires, Winch Stand with steps, handrail and LED Lighting. 1800lb Carrying Capacity.
Add on Options For Single Axle Trailers
Aluminum Rim Wheel Exchange
Tandem Axle Heavy Duty Pontoon Trailers
Spare Tire w/mount - 12" or 13"
Stops 7000 lbs.
Bolt on Tie-Down Straps
Package consists of bunk support for the center pontoon. A special heavy duty Winch stand with wider steps, handrail, and extra depth for protruding center tube. The stand itself is heavier steel to accommodate the additional weight of triple tube pontoons and has a #3200 front loading winch
(in lieu of the normal 1500 lb.) to pull on the heaviest pontoon.
We can fit any style: we just need to know the year, make, and model of your boat.
Add on Options For Tandem Axle Trailers
Plastic Bunk Wrap